Solid Carbide Home
High Performance Series | General Purpose | Micro | Diamond

Elite Solid Carbide Neck Style End Mills for Aluminum ELITE Series AN345 is designed for slotting, pocketing and long reach peripheral milling applications.
AN345 Provides: √ Increased Rigidity √ Less Deflection √ Chatter Reduction √ Higher Metal Removal Rates √ Improved Surface Finish	AN345 - 3 Flute 45 ° Helix Solid Carbide • Cylindrical Land • Full Form Ground Flute Shape • Eccentric Primary Relief • Extra-Fine Grain Solid Carbide • Stocked with Radius and TiCN Microshield™ Coating

Price Code E
Flute Dia	Shank Dia	Length of Cut	Length Below Shank	Neck Dia	Overall Length	# F	Uncoated without Radius		TiCN with Radius
							EDP	List	EDP	List
1/4	1/4	3/8	2 1/8	.240	4	3	18597	$42.45	18614	$47.49
5/16	5/16	7/16	2 1/8	.300	4	3	18598	$68.66	18615	$76.94
3/8	3/8	3/8	1 1/8	.360	2 1/2	3	18599	$36.06	18616	$40.43
3/8	3/8	1/2	2 1/8	.360	4	3	18600	$61.38	18617	$68.77
3/8	3/8	1/2	4 1/8	.360	6	3	18601	$92.06	18618	$103.15
1/2	1/2	1/2	1 3/8	.480	3	3	18602	$55.10	18619	$61.71
1/2	1/2	5/8	2 1/8	.480	4	3	18603	$87.25	18620	$97.66
1/2	1/2	5/8	4 1/8	.480	6	3	18604	$136.86	18621	$153.33
5/8	5/8	3/4	2	.600	4	3	18605	$134.06	18622	$150.19
5/8	5/8	3/4	4	.600	6	3	18606	$212.35	18623	$237.89
3/4	3/4	3/4	1 3/4	.720	4	3	18607	$157.81	18624	$176.74
3/4	3/4	1	2 1/2	.720	5	3	18608	$190.29	18625	$213.14
3/4	3/4	1	3 1/2	.720	6	3	18609	$205.63	18626	$230.27
3/4	3/4	1	4 1/8	.720	7	3	18610	$347.98	18627	$389.76
1	1	1 1/4	2 1/2	.960	5	3	18611	$233.30	18628	$261.30
1	1	1 1/4	3 1/2	.960	6	3	18612	$311.02	18629	$348.32
1	1	1 1/4	4 1/4	.960	7	3	18613	$433.66	18630	$485.74
Flute Dia.		+0.000" -0.002"		Helix Angle				45°
Shank Dia.		-0.0001" -0.0004"		Length of Cut				1/16 to 5/16" +.030/-.000"
Overall Length		+/-0.060"		21/64 to 1" +.060/-.000"

Niagara’s AN345 Neck Series End Mills, has the same high performance geometry as our ELITE A345. The short flute length combined with the solid neck provide greater rigidity than extra length fluted end mills. The recessed neck area has a superior surface finish and a chamfer blend to the cutting diameter and shank. The recessed neck offers clearance and chip space in long reach applications.

---

Elite Solid Carbide Neck Style End Mills for Steel, Stainless Steel, Titanium and Exotic Alloys ELITE Series SN335 is designed for slotting, pocketing and long reach peripheral milling applications.
SN335 Provides: √ Increased Rigidity √ Less Deflection √ Chatter Reduction √ Higher Metal Removal Rates √ Improved Surface Finish	SN335 - 3 Flute 35 ° Helix Solid Carbide • Full Form Ground Flute Shape • Standard with Radius • Extra-Fine Grain Solid Carbide • Stocked with Radius and TiAIN Microshield™ Coating

Price Code E
Flute Dia	Shank Dia	Length of Cut	Reach	Neck Dia	Overall Length	# F	Radius	Uncoated		TiAlN
								EDP	List	EDP	List
1/4	1/4	3/8	2 1/8	.240	4	3	.015 - .020	18631	$42.45	18648	$47.49
5/16	5/16	7/16	2 1/8	.300	4	3	.015 - .020	18632	$68.66	18649	$76.94
3/8	3/8	1/2	2 1/8	.360	4	3	.015 - .020	18633	$61.38	18650	$68.77
3/8	3/8	1/2	3 3/8	.360	6	3	.015 - .020	18634	$92.06	18651	$103.15
7/16	7/16	9/16	2 1/8	.420	4	3	.015 - .020	18635	$82.88	18652	$92.85
7/16	7/16	9/16	3 3/8	.420	6	3	.015 - .020	18636	$112.00	18653	$125.44
1/2	1/2	5/8	2 1/8	.480	4	3	.030 - .035	18637	$87.25	18654	$97.66
1/2	1/2	5/8	3 1/8	.480	5	3	.030 - .035	18638	$112.00	18655	$125.44
1/2	1/2	5/8	4 1/8	.480	6	3	.030 - .035	18639	$136.86	18656	$153.33
5/8	5/8	3/4	2 1/8	.600	4	3	.030 - .035	18640	$134.06	18657	$150.19
5/8	5/8	3/4	3 1/8	.600	5	3	.030 - .035	18641	$173.26	18658	$194.10
5/8	5/8	3/4	4	.600	6	3	.030 - .035	18642	$213.58	18659	$239.23
3/4	3/4	1	2	.720	4	3	.030 - .035	18643	$157.81	18660	$176.74
3/4	3/4	1	3	.720	5	3	.030 - .035	18644	$190.29	18661	$213.14
3/4	3/4	1	4	.720	6	3	.030 - .035	18645	$215.71	18662	$241.58
1	1	1 1/4	3	.960	5	3	.030 - .035	18646	$233.30	18663	$261.30
1	1	1 1/4	4	.960	6	3	.030 - .035	18647	$311.02	18664	$348.32
Flute Dia.		+0.000" -0.002"		Overall Length		+/-0.060"			Helix Angle		45°
Shank Dia.		-0.0001" -0.0004"		Length of Cut		1/16 to 5/16" +.030/-.000"			21/64 to 1" +.060/-.000"

Niagara’s SN335 Neck Series End Mills, has the same high performance geometry as our ELITE S335. The short flute length combined with the solid neck provide greater rigidity than extra length fluted end mills. The recessed neck area has a superior surface finish and a chamfer blend to the cutting diameter and shank. The recessed neck offers clearance and chip space in long reach applications.